| TeliMan Server | ||||||||||||||||||||||||||
| [ROMICO]=Software\ROMIC | ||||||||||||||||||||||||||
| TAPI handling | Network handling | Data handling | CTI User Status | Protocol | ||||||||||||||||||||||
| MultiLine | [HKLM \ TMS\ TAPI] | ML_TSP="1" | Enable
multiline in server in MultiLineSrv.reg is also reg UseTaskList=1 |
TMS_TAPI_MultiLineSrv.reg | TMS < 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| MultiLine | [HKLM \ TMS\ TSP] | ML_TSP="1" | Enable
multiline in server in MultiLineSrv.reg is also reg UseTaskList=1 |
TMS_TSP_MultiLineSrv.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| NoMultiCast | [HKLM \ TMS \ Networking] | NoMultiCast="1" | NoMultiCast [default: >= 5.0.973 "1", else "0"] |
NoMultiCast.reg | ||||||||||||||||||||||
| NoMultiCastNoDoEvents | [HKLM \ TMS \ Networking] | NoMultiCastNoDoEvents="1" | do events during send message to all users | NoMultiCastNoDoEvents.reg | ||||||||||||||||||||||
| TMS_TMServer Ocx_list.reg |
[HKLM\ TMS\ Networking] | UseTaskList="1" TaskListCheckingPeriod="30" TaskListAllTasks="1" |
"UseTaskList"="1"
- use list method-default 0 "TaskListCheckingPeriod"="30" – interwal timera, default 25ms "TaskListAllTasks"="1" default 0 ServerSocket1Accept and ServerSocket1ClientConnect also on queue |
TMS_TMServer_Ocx_list.reg | TMS>=4.5.0.380 | |||||||||||||||||||||
| TMS_PrefixInternalCall | [HKLM\ TMS\ PABX] | PrefixInternalCall="*" | Add to internal outgoing call | TMS_PrefixInternalCall.reg | TMS>=4.5.0.387 | |||||||||||||||||||||
| MultiplexAt12_Off | [HKLM\ TMS\ Call Parameters] | MultiplexCall="0" | Disable MultiplexCall [Default 1] |
TMS_MultiplexCall_Off.reg | TMS>=4.5.0.546; 13.09.2007 | |||||||||||||||||||||
| MultiplexCallNumber1 | MultiplexCallNumber1 | Disable MultiplexCall [Default …28] |
TMS_MultiplexCallNumber1.reg | |||||||||||||||||||||||
| MultiplexCallNumber2 | MultiplexCallNumber2 | Disable MultiplexCall [Default …29] |
TMS_MultiplexCallNumber2.reg | |||||||||||||||||||||||
| TMS_Restart | [HKLM\ TMS\ Options] | RestartTime="14:31" | Restart TMS on time 14:31 | TMS_restart.reg | TMS>=4.5.0.390 | |||||||||||||||||||||
| TMS_Restart_Delay | [HKLM\ TMS\ Options] | RestartTimeDelay="300" | After Close TMS wait 300s till again run TMS [Default 60s] | TMS_restartDelay.reg | TMS>=4.5.0.434 | |||||||||||||||||||||
| Restart_DoTapiSrvStop | [HKLM\ TMS\ Options] | Restart_DoTapiSrvStop="1" | During restart stop Telephony service [Default 0-not work] | TMS_Restart_DoTapiSrvStop.reg | TMS>=5.0.0.3511; 15.10.2009 | |||||||||||||||||||||
| Restart_DoSvchostKill | [HKLM\ TMS\ Options] | "Restart_DoSvchostKill"="1" | During restart kill svchost.exe(tapisrv.dll)[Default 0-not work] | TMS_Restart_DoSvchostKill.reg | TMS>=5.0.0.3511; 15.10.2009 | |||||||||||||||||||||
| TMS_Close | [HKLM\ TMS\ Options] | CloseTime="14:31" | Close TMS on every time 14:31 | TMS_CloseTime.reg | TMS>=4.5.0.445; 04.04.2007 | |||||||||||||||||||||
| noRULbyAbsent | [HKLM\ TMS\ CallCenter] | noRULbyAbsent="1" | check during redirection for multiple destonition if destination is not absent | TMS_NoRULByAbsent.reg | TMS>=4_5_829; 04.02.2008 [default 0-do not check absent] TMS>=5_0_3429; 22.06.2009 [default 1-check absent] |
|||||||||||||||||||||
| TranslateCode_ Apostrophe |
[HKLM\
TMS\Other] |
"TranslateCode_Apostrophe"="" | Replace ' (apostrof) for "" in provider name. [Default \] | TMS_TranslateCode_ Apostrophe.reg |
TMS>=4.5.0.788; 09.11.2007 | |||||||||||||||||||||
| AllowCharsInNumber | [HKLM\ TMS\ Other] | AllowCharsInNumber="*#" | AllowCharsInNumber [default *#] | TMS_AllowCharsInNumber.reg | TMS>=5.0.0.1008; 01.09.2008 | |||||||||||||||||||||
| TMChecker | [HKLM\
TMS\Other] |
TMChecker="1" | Automatically start TMS after unsuspected close TMS [Default 0 - doesn't work] | TMS_TMChecker.reg | TMS>=5.0.0.1101; 06.12.2008 | |||||||||||||||||||||
| Protocol | ||||||||||||||||||||||||||
| CalledIDView | [HKLM\ TMS\ Other] | "CalledIDView"="0" | Enalbe calledID in protocol[default 1] | TMS_CalledIDView.reg | TMS>=4_5_829; 04.02.2008 | |||||||||||||||||||||
| Protocol in mdb | [HKLM\ TMS\ Protocol] | ProtocolDatabaseType="mdb" | Protocol in mdb [default "" - mdb] | TMS_Protocol_Mdb.reg | TMS: 4_5_1049; 11.09.2008 | |||||||||||||||||||||
| ProtocolMdbPath="C:\Programme\ROMICO CTI Server\TMServer\Protocol.mdb" | [default "" - C:\Programme\ROMICO CTI Server\ TMServer\\Protocol.mdb] | |||||||||||||||||||||||||
| Protocol in sql server | [HKLM\ TMS\ Protocol] | ProtocolDatabaseType="sql" | Protocol in sql [default ""-Protocol.mdb] | TMS_Protocol_Sql.reg | TMS: 4_5_1049; 11.09.2008 | |||||||||||||||||||||
| ProtocolSQLServer= ServerSql\SQLEXPRESS |
sql server name [default "" - Protocol.mdb] | |||||||||||||||||||||||||
| ProtocolSQLDBName="TeliMan" | Database name [default "TeliMan"] | |||||||||||||||||||||||||
| Timer mTimer_ ProtocolCheck interval |
[HKLM\ TMS\ Protocol] | "CheckProtocolForClient_Interval"="15" | Interval
for timer. This timer check protocol db for calls when client was off
line [default "15"] [if 0 then timer is disabled] [s] |
TMS_Protocol_Check ProtocolForClient_Interval.reg |
TMS>=4_5_1055; 26.09.2008 | |||||||||||||||||||||
| DBUpdateAfterConnected | [HKLM\ TMS\ Protocol] | DBUpdateAfterConnected=5000 | Run Unbold
with delay when state Connected [default 1000ms] |
TMS_Protocol_ DBUpdateAfterConnected.reg |
TMS>=5.0.1094; 04.11.2008 | |||||||||||||||||||||
| Protocol_SelectCount | [HKLM]\ [TMS]\ Protocol | “SelectCount"="10000" | Top select count for protocol database [Default="5000"] | TMS_Protocol_SelectCount.reg | TMS>=5_0_3512; 21.10.2009 | |||||||||||||||||||||
| Protocol_DeleteCount | [HKLM]\ [TMS]\ Protocol | “DeleteCount” = “10000” | Top delete count for protocol database [Default="5000"] | TMS_Protocol_DeleteCount.reg | TMS>=5_0_3512; 21.10.2009 | |||||||||||||||||||||
| IgnoreCallerIDList | [HKLM]\ [TMS]\ Protocol | IgnoreCallerIDList=”227;228” | List of CallerId’s, calls with these ID’s won’t be inserted to the protocol by CTI_Server. [Default = ””] | CTI_Server_Protocol_ IgnoreCallerIDList.reg |
CTI_Server>=5_0_4199;
12.02.2010 not available in TMS VB6 |
|||||||||||||||||||||
| IgnoreCalledIDList | [HKLM]\ [TMS]\ Protocol | IgnoreCalledIDList=”227;228” | List of CalledId’s, calls with these ID’s won’t be inserted to the protocol by CTI_Server. [Default = ””] | CTI_Server_Protocol_ IgnoreCalledIDList.reg |
CTI_Server>=5_0_4199;
12.02.2010 not available in TMS VB6 |
|||||||||||||||||||||
| TAPI handling | ||||||||||||||||||||||||||
| ClearCalls | [HKLM\ TMS\ TAPI] | ClearCalls="1" | TMS check in tsp and if no calls in tsp clear calls in tms on this line, default 0 | TMS_TAPI_ClearCalls.reg | TMC>=4.5.0.2454,
default 0:TMS>=4.5.0.380< 4.5.0.422 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| ClearCalls | [HKLM\ TMS\ TSP] | ClearCalls="1" | TMS check in tsp and if no calls in tsp clear calls in tms on this line, default 0 | TMS_TSP_ClearCalls.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| ClearCalls Disable | [HKLM\ TMS\ TAPI] | ClearCalls="0" | Disable: TMS check in tsp and if no calls in tsp clear calls in tms on this line, default 1 | TMS_TAPI_ClearCallsOff.reg | TMC>=4.5.0.2454,default
1: TMS>=4.5.0.422 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| ClearCalls Disable | [HKLM\ TMS\ TSP] | ClearCalls="0" | Disable: TMS check in tsp and if no calls in tsp clear calls in tms on this line, default 1 | TMS_TSP_ClearCallsOff.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| PairedReq_ON | [HKLM\ TMS\ TAPI] | PairedReqTSP="1" | Advanced function paire req beatween TMC<->TMS, default 0 | TMS_TAPI_PairedReq_ON.reg | TMC>=4.5.0.2454,default
0:TMS>=4.5.0.380<4.5.0.422 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| PairedReq_ON | [HKLM\ TMS\ TSP] | PairedReqTSP="1" | Advanced function paire req beatween TMC<->TMS, default 0 | TMS_TSP_PairedReq_ON.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| PairedReq_Off | [HKLM\ TMS\ TAPI] | PairedReqTSP="0" | Advanced function paire req beatween TMC<->TMS, default 1 | TMS_TAPI_PairedReq_Off.reg | TMC>=4.5.0.2454,default 1:
TMS>=4.5.0.422 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| PairedReq_Off | [HKLM\ TMS\ TSP] | PairedReqTSP="0" | Advanced function paire req beatween TMC<->TMS, default 1 | TMS_TSP_PairedReq_Off.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| ReopenLineOnErrorMC | [HKLM\ TMS\ TAPI] | ReopenLineOnErrorMC="1" | Reopen TAPI-Line, when MakeCall return error [default=0] | TMS_TAPI_ReopenLineOnErrorMC.reg | TMS >= 4.5.0.398 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| ReopenLineOnErrorMC | [HKLM\ TMS\ TSP] | ReopenLineOnErrorMC="1" | Reopen TAPI-Line, when MakeCall return error [default=0] | TMS_TSP_ReopenLineOnErrorMC.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| MakeCall
ReOpen_Disable_When |
[HKLM\ TMS\ TAPI] | MakeCall_ReOpen_Disable_When= "LINEERR_OPERATIONUNAVAIL" | ReopenLineOnErrorMC must be on 1, disable ReopenAfter MK, when error, default="" | TMS_TAPI_MakeCall_ ReOpen_Disable_When.reg |
TMS>=4.5.0.427 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| MakeCall
ReOpen_Disable_When |
[HKLM\ TMS\ TSP] | MakeCall_ReOpen_Disable_When= "LINEERR_OPERATIONUNAVAIL" | ReopenLineOnErrorMC must be on 1, disable ReopenAfter MK, when error, default="" | TMS_TSP_MakeCall_ ReOpen_Disable_When.reg |
TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| MakeCall_ReOpen_ Disable_Recall |
[HKLM\ TMS\ TAPI] | MakeCall_ReOpen_ Disable_Recall="1" |
ReopenLineOnErrorMC must be on 1, disable Recall After MK, when error,and Reopen [default="0"] | TMS_TAPI_MakeCall_ ReOpen_Disable_Recall.reg |
TMS>=4.5.0.439;
03.04.2007 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| MakeCall_ReOpen_ Disable_Recall |
[HKLM\ TMS\ TSP] | MakeCall_ReOpen_ Disable_Recall="1" |
ReopenLineOnErrorMC must be on 1, disable Recall After MK, when error,and Reopen [default="0"] | TMS_TSP_MakeCall_ ReOpen_Disable_Recall.reg |
TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| MakeCall_ReOpen_ Disable_Reopen |
[HKLM\ TMS\ TAPI] | MakeCall_ReOpen_ Disable_Reopen="1" |
ReopenLineOnErrorMC must be on 1, disable Reopen After MK, when error,and MK [default="0"] [read reg before use] | TMS_TAPI_MakeCall_ ReOpen_Disable_Reopen.reg |
TMS>=4.5.0.445; 04.04.2007
TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| MakeCall_ReOpen_ Disable_Reopen |
[HKLM\ TMS\ TSP] | MakeCall_ReOpen_ Disable_Reopen="1" |
ReopenLineOnErrorMC must be on 1, disable Reopen After MK, when error,and MK [default="0"] [read reg before use] | TMS_TSP_MakeCall_ ReOpen_Disable_Reopen.reg |
TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| TelephonyReinit_On | [HKLM\ TMS\ TAPI] | Telephony_Reinit="1" [default=0] | restart all lines when change TAPI in system | TMS_TAPI_TelephonyReinit_On.reg | TMS>=4.5.0.398; TMS < 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| TelephonyReinit_On | [HKLM\ TMS\ TSP] | Telephony_Reinit="1" [default=0] | restart all lines when change TAPI in system | TMS_TSP_TelephonyReinit_On.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| TMS_NoLineID | [HKLM\ TMS\ TAPI] | NoLineID="1" [default=0] | Use line description instead line key | TMS_TAPI_NoLineID.reg | default
0:TMS>=4.5.0.404<4.5.0.422 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| TMS_NoLineID | [HKLM\ TMS\ TSP] | NoLineID="1" [default=0] | Use line description instead line key | TMS_TSP_NoLineID.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| TMS_NoLineID_Off | [HKLM\ TMS\ TAPI] | NoLineID="0" [default=1] | Do not Use line description instead line key | TMS_TAPI_NoLineID_Off.reg | default
1: TMS>=4.5.0.422 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| TMS_NoLineID_Off | [HKLM\ TMS\ TSP] | NoLineID="0" [default=1] | Do not Use line description instead line key | TMS_TSP_NoLineID_Off.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| DisableResetLines | [HKLM\ TMS\ TAPI] | DisableResetLines="1" [default=0] | disable function: Reset lines - close open all lines if was error with open line by TMS start | TMS_TAPI_DisableResetLines.reg | TMS>=4.5.0.404 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| DisableResetLines | [HKLM\ TMS\ TSP] | DisableResetLines="1" [default=0] | disable function: Reset lines - close open all lines if was error with open line by TMS start | TMS_TSP_DisableResetLines.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| LineOpenRetry | [HKLM\ TMS\ TAPI] | LineOpenRetry="3" | LineOpen wait 200ms and try again LineOpen LineOpenRetry times, default 3 | TMS_TAPI_LineOpenRetry.reg | TMS
>= 4.5.0.411 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| LineOpenRetry | [HKLM\ TMS\ TSP] | LineOpenRetry="3" | LineOpen wait 200ms and try again LineOpen LineOpenRetry times, default 3 | TMS_TSP_LineOpenRetry.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| LineOpenTimeout | [HKLM\ TMS\ TAPI] | LineOpenTimeOut="200" | LineOpen wait 200ms and try again LineOpen LineOpenRetry times, default 200ms | TMS_TAPI_LineOpenTimeout.reg | TMS >= 4.5.0.411 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| LineOpenTimeout | [HKLM\ TMS\ TSP] | LineOpenTimeOut="200" | LineOpen wait 200ms and try again LineOpen LineOpenRetry times, default 200ms | TMS_TSP_LineOpenTimeout.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| LineReset CloseOpenDelay | [HKLM\ TMS\ TAPI] | LineResetCloseOpenDelay="200" | LineReset beatween LineClose and Open wait 200 ms, default 200 | TMS_TAPI_LineResetCloseOpenDelay.reg | TMS
>= 4.5.0.411 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| LineReset CloseOpenDelay | [HKLM\ TMS\ TSP] | LineResetCloseOpenDelay="200" | LineReset beatween LineClose and Open wait 200 ms, default 200 | TMS_TSP_LineResetCloseOpenDelay.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| MakeCall
ReOpen_Disable_When |
[HKLM\ TMS\ TAPI] | MakeCall_ReOpen_Disable_When= "LINEERR_OPERATIONUNAVAIL" | ReopenLineOnErrorMC must be on 1, disable ReopenAfter MK, when error, default="" | TMS_TAPI_MakeCall_ ReOpen_Disable_When.reg |
TMS>=4.5.0.427 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| MakeCall
ReOpen_Disable_When |
[HKLM\ TMS\ TSP] | MakeCall_ReOpen_Disable_When= "LINEERR_OPERATIONUNAVAIL" | ReopenLineOnErrorMC must be on 1, disable ReopenAfter MK, when error, default="" | TMS_TSP_MakeCall_ ReOpen_Disable_When.reg |
TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| CheckAndRemove BadCallsFromEngine |
[HKLM\ TMS\ TAPI] | CheckAndRemoveBadCalls FromEngine="3" [default=3] |
CheckAndRemoveBadCalls on every 3 minuts. 0 - disabled | TMS_TAPI_CheckAndRemoveBadCallsFromEngine.reg | TMS>=4.5.0.476;
31.05.2007 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| CheckAndRemove BadCallsFromEngine |
[HKLM\ TMS\ TSP] | CheckAndRemoveBadCalls FromEngine="3" [default=3] |
CheckAndRemoveBadCalls on every 3 minuts. 0 - disabled | TMS_TSP_CheckAndRemoveBadCallsFromEngine.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| CheckAndRemoveBad CallsFromEngine_AllIdle |
[HKLM\ TMS\ TAPI] | CheckAndRemoveBadCallsFrom Engine_AllIdle="1" [default=0] |
Remove calls in Idle state | TMS_TAPI_CheckAndRemoveBadCallsFromEngineIdle.reg | TMS>=4.5.0.476;
31.05.2007 TMS < 20.02.2009; 5_0_3190 |
|||||||||||||||||||||
| CheckAndRemoveBad CallsFromEngine_AllIdle |
[HKLM\ TMS\ TSP] | CheckAndRemoveBadCallsFrom Engine_AllIdle="1" [default=0] |
Remove calls in Idle state | TMS_TSP_CheckAndRemove BadCallsFromEngineIdle.reg |
TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| TMS_TAPI StringCorrection (Avaya example) |
[HKLM\ TMS\ TriusTAPI\ Avaya TAPI 2.2 Service Provider] | StringCorrection="-1" [default = "" do not delete any sing] |
remove one sing from LineName when problem with load line (Avaya example) | TMS_TriusTAPI_StringCorrection.reg | TMS < 20.02.2009;
5_0_3190 |
|||||||||||||||||||||
| TMS_TAPI StringCorrection |
[HKLM\ TMS\ TSP] | StringCorrection="-1" [default = "" do not delete any sing] |
remove one sing from LineName when problem with load line (Avaya example) | TMS_TSP_StringCorrection.reg | TMS >= 20.02.2009; 5_0_3190 | |||||||||||||||||||||
| ReopenLines_Intervall | [HKLM]\ [TMS]\ TSP | ReopenLines_Intervall= “5” | ReopenLines
timer interval in minutes [Default: “1”] [min] |
TMS_ReopenLines_Intervall.reg | TMS: 5_0_3470; 27.07.2009 | |||||||||||||||||||||
| Network handling | ||||||||||||||||||||||||||
| GetTCPTapiPortRet0 | [HKLM\ TMS\] | GetTCPTapiPortRet0="1" | for test GetTCPTapiPort return 0 when TMC ask->TeliMan.tsp not work, default 0 | TMS_GetTCPTapi PortRet0-1.reg |
TMS>=4.5.0.416 | |||||||||||||||||||||
| DisconnectVirtualTAPI | [HKLM\ TMS\ Networking] | DisconnectVirtualTAPI="1" | Disconnect tmc tapi connection in LineClose, default 0 | TMS_Disconnect VirtualTAPI.reg |
TMS>=4.5.0.418 | |||||||||||||||||||||
| TMS_DoNotCheck | [HKLM\ TMS\ Options] | DoNotCheck="1" | Do not check if other TMS exists in network | TMS_DoNotCheck.reg | TMS>=4.5.0.435 13.03.2007 | |||||||||||||||||||||
| UserStateSend | [HKLM\ TMS\ Networking] | RefreshUserStateIntervall="1000" | Send
StatusAll on every 1000 s must be RefreshUserState="1"[default 30s] |
TMS_UserStateSend.reg | TMS>=5_0_999; 21.08.2008 | |||||||||||||||||||||
| UseTaskList | [HKLM\ TMS\ Networking] | UseTaskList="1" | TMServer.ocx: when 0 causes problem in TMC cut messages [default 0] | TMS_UseTaskList.reg | ||||||||||||||||||||||
| TaskListCheckingPeriod | [HKLM\ TMS\ Networking] | TaskListCheckingPeriod="5" | TMServer.ocx when UseTaskList sleep beatween next check is something in queue [default 25 ms] | |||||||||||||||||||||||
| BusySendAlways | [HKLM\ TMS\ Networking] | BusySendAlways="0" | TMS send Busy to TMC only when change value busy [default 0] | TMS_BusySendAlways.reg | TMS>=5_0_1001; 25.08.2008 | |||||||||||||||||||||
| MultiCastASCIIEncoding | [HKLM\ TMS\ Networking] | MultiCastASCIIEncoding = "1“ | Turn on network messages encoding in ASCII. Warning: flag sets encoding only in TMS! [default = „0” -> Cstr()] | TMS_Networking_ MultiCastASCIIEncoding.reg |
TMS>=5_0_1143; 28.11.2008 | |||||||||||||||||||||
| ConnectionPortFindFree | [HKLM\ TMS\ Networking] | ConnectionPortFindFree = “0” | If flag is set CTI_Server detect first free port when main port is taken. | TMS_Networking_ ConnectionPortFindFree.reg |
TMS>=5_0_1143;
28.11.2008 [Default = “1”] TMS>=5_0_3428; 19.06.2009 [Default = “0”] |
|||||||||||||||||||||
| SocketDisconnect ExtraThread |
[HKLM\ TMS\ Networking] | SocketDisconnect_ExtraThread= "0“ | Create new thread for SocketDisconnect function.[default „1” - thread (no blocking)] | TMS_Networking_ SocketDisconnect_ ExtraThread0.reg |
TMS>=5_0_1144; 01.12.2008 | |||||||||||||||||||||
| MultiCastMessage MaxLenght |
[HKLM\ TMS\ Networking] | MultiCastMessageMaxLenght = "5000" |
Maximum allowed incomming multicast message size in TMS. For both SearchServers and Standard multicast connection. [default: 65528] | TMS_Networking_ MultiCastMessageMaxLenght.reg |
TMS>=5_0_3204; 06.03.2009 | |||||||||||||||||||||
| InfoCaption | [HKLM\ TMS\ Options] | "InfoCaption"="TestPass" | Password for Client -> Server TeliView connection (CTI-S). [default MaxiPaket] | TMS_Options_InfoCaption.reg | TMS>=5_0_3416; 30.04.2009 | |||||||||||||||||||||
| QueueDisplayInterval | [HKLM\ TMS\ Networking] | "QueueDisplayInterval"="500" | Message
queue counter refresh interval.[default: 1000] If value = 0 then queue counter is off. |
TMS_Networking_ QueueDisplayInterval.reg |
TMS>=5_0_3416;
30.04.2009 not working in CTI_Server.Net |
|||||||||||||||||||||
| International | [HKLM\ TMS\ Options] | "InternationalMode"="1" | send
date as double (server english, client german windows) [default 0 - send as text, now only Absent] |
TMS_International_on.reg | TMS>=5_0_3450; 21.07.2009 | |||||||||||||||||||||
| VPNTaskTimeout | [HKLM]\ [TMS]\ Networking | "VPNTaskTimeout"="15000" | VPN Network connection task timeout. Time that server waits for an answer. First timeout generates resend of a message, second timeout generates VPN disconnect [Default ="5000"] [restart not necessary] | TMS_CTI_Network_ VPNTaskTimeout.reg |
TMS>=5_0_3490; 09.09.2009 | |||||||||||||||||||||
| StatusResendCount |
[HKLM]\ [TMS]\ [Networking]\ | "StatusResendCount"="2" |
How many times TMS should resend user states after any change [Default ="1"] For disable StatusResend set this flag to 0 | TMS_Networking_ StatusResendCount.reg |
TMS>=5_0_3494; 21.09.2009 | |||||||||||||||||||||
| StatusResendInterval |
[HKLM]\ [TMS]\ [Networking]\ | "StatusResendInterval"="10" |
Timer
interval [sec] used to resend all changed userstates [Default ="20"] |
TMS_Networking_ StatusResendInterval.reg |
TMS>=5_0_3494; 21.09.2009 | |||||||||||||||||||||
| StatusResendMultiServer |
[HKLM]\ [TMS]\ [Networking]\ | "StatusResendMultiServer"="1" | Should TMS use ResendStates mechanism to send states to other servers [Default ="0"] | TMS_Networking_ StatusResendMultiServer.reg |
TMS>=5_0_3497; 25.09.2009 | |||||||||||||||||||||
| Data handling | ||||||||||||||||||||||||||
| Delete Top (RefSearch) | [HKLM\ TMS \
RefSearch] |
DeleteCount="500" | RefSearch: if
timeout DELETE FROM RefSearch than DELETE TOP(10000) FROM RefSearch |
DeleteCount.reg | TMC >=4.5.0.2442 | |||||||||||||||||||||
| RefSearch | [HKLM\
TMS \ RefSearch] |
RunHour="14:35" | Run RefSearch on TMS | RefSearch.reg | TMS>=4.5.0.379 | |||||||||||||||||||||
| RefSearch | [HKLM\
TMS \ RefSearch] |
PrintCutNames="1" | RefSearch print in log file when TrimOver cut some text | RefSearch_PrintCutNames.reg | TMS>=4.5.0.379 | |||||||||||||||||||||
| Central Folder | [HKLM\ TMS] | CentralDesktopDB="z:\\ CentralDesktop.mdb" |
path to central folder (must be CentralDesktop.mdb) | CentralDesktop.reg | TMC>=4.5.0.2427,TMS>=4.5.0.372 09.11.2007 Srv: 4.5.0.790 necessary also set: C:\Programme\TeliMan Pro Server\TMConfig\TMS_Config.mdb column CentralDesktopPath, table: tblUsers |
|||||||||||||||||||||
| ReferenceConnector | [HKLM]\
[TMS] |
ReferenceConnector="1" | Enable search field ExtraField in reference database | TMS_ReferenceConnector.reg | TMS>=4_5_811;06.12.2007<5_0_3076;12.03.2009(license) | |||||||||||||||||||||
| RefSearch | [HKLM\
TMS \ RefSearch] |
RunHour="14:35" | Run RefSearch on TMS | RefSearch.reg | TMS>=4.5.0.379 | |||||||||||||||||||||
| RefSearch_ MaxCacheEntries |
[HKLM]\ [ROMICO]\ DBConnector | RefSearch_MaxCacheEntries=”200” | Maximum cache entries in DBConnector reference search mechanism. [Default = “5000”] | DBConnector_RefSearch_ MaxCacheEntries.reg |
TMS>=5_0_3656; CTI_Server>=7.0.0.4270; 09.03.2010 | |||||||||||||||||||||
| Mail disable | [HKLM\ TMS \ Other] | MailDisable="1" | TMS_MailDisable.reg | TMS>=4.5.0.513; 09.07.2007 | ||||||||||||||||||||||
| Mail to | "MailTo"="gd@logium.pl" | TMS_MailTo.reg | ||||||||||||||||||||||||
| Mail from | MailFrom="TMS@romico.de" | TMS_MailFrom.reg | ||||||||||||||||||||||||
| Mail server | MailServer="auth.smtp.kundenserver.de" | TMS_MailServer.reg | ||||||||||||||||||||||||
| Mail user | MailUser="m33778350-17" | TMS_MailUser.reg | ||||||||||||||||||||||||
| Mail password | MailPassword="password" | TMS_MailPassword.reg | ||||||||||||||||||||||||
| Mail subject | MailSubject="TMS Info" | TMS_MailTo.reg | ||||||||||||||||||||||||
| CTI User Status | ||||||||||||||||||||||||||
| [CTI_UserStatus]=Software\ROMICO\CTI_UserStatus | ||||||||||||||||||||||||||
| UserStatusPort | [HKLM\ TMS\ Networking] | UserStatusPort="8370" | TMS listen on
this port for CTI_UserStatus [default 8330 if port busy then get first free] |
TMS_CTI_UserStatusPort.reg | TMS>=5.0.0.839; 18.03.2008 | |||||||||||||||||||||
| ErrorActionLogOnly0 | [HKCU\ TMS\ ErrorAction] | FileLogOnly="0" | CTI_UserStatus
show MsgBox when error [default 1 log errors only to file] |
TMS_CTI_UserStatus_ ErrorActionLogOnly0.reg |
TMS>=5.0.0.839; 18.03.2008 | |||||||||||||||||||||
| CTI_UserStatus_ RefreshInterval |
[HKCU]\ [CTI_UserStatus]\ Network | "RefreshInterval"="10" | Time beetween UserStatus List refresh [sec]. [default = "60"] | CTI_UserStatus_RefreshInterval.reg | TMS>=5.0.0.3499; 02.10.2009<5.0.0.3534; 19.11.2009 | |||||||||||||||||||||
| GetStatus_Interval | [HKCU]\ [CTI_UserStatus]\ Options | "GetStatus_Interval"="60" | "GetStatus_Interval"="60" Reloading all user status each minute is off by default. Interval of refreshing can be set by this registry. [Default = “0”] | CTI_UserStatus_GetStatus_ Interval_60.reg |
TMS>=5.0.0.3534; 19.11.2009 | |||||||||||||||||||||
| Debug | ||||||||||||||||||||||||||
| BusyCountSend | [HKCU\ TMS\ Debug] | BusyCountSend="1" | at the and Busy message add counter - to be sure that clients receive it correctly. Warning it shouldn't work too long - possible overflow [default 0] | TMS_Debug_BusyCountSend.reg | TMS>=5.0.0.3519; 30.10.2009 | |||||||||||||||||||||
| CTI_Network | [HKCU]\ [TMS]\ ErrorAction | "Debug"="1" | [default 0] | TMS_CTI_Network_Debug.reg | TMS>=5.0.0.3519; 30.10.2009 | |||||||||||||||||||||
| NetworkMonitor | ||||||||||||||||||||||||||
| Monitoring_ NetworkMonitor |
HKLM]\ [TMS]\ Monitoring | “NetworkMonitor"="1" | Turn on
monitoring of network queues. [Default = "0"]. All monitoring data will be saved to “Monitoring” registry key in following values: "NMC_InMsgCurrentQueueSize"="0" "NMC_InMsgCount"="0" "NMC_InMsgMaxQueueSize"="0" "NMC_OutMsgCurrentQueueSize"="0" "NMC_OutMsgCount"="1" "NMC_OutMsgMaxQueueSize"="1" "MC_InMsgCurrentQueueSize"="0" "MC_InMsgCount"="0" "MC_InMsgMaxQueueSize"="0" "MC_OutMsgCurrentQueueSize"="0" "MC_OutMsgCount"="0" "MC_OutMsgMaxQueueSize"="0" "ConnectedSocketsCount"="0" "ConnectedUsersCount"="0" |
CTI_Server_Monitoring_ NetworkMonitor_1.reg |
CTI_Server.Net>=5.0.0.4044; 26.11.2009 | |||||||||||||||||||||