OmniPCX_Enterpise
this color means LogFiles AlcatelKey = SOFTWARE\Romico\Tapi\SPIAlca.tsp
Current version:
11.07.2007 RoAlcEnt.tsp:  1.0.3.1009
13.07.2007 RoAlcEUI.dll: 1.0.3.355
           
CSTA - Connection & Functions
Reconnect_Disabled  Reconnect_Disable="1" [0] This flag is disabling reconnect (CSTA Connection TAPI<>PBX) feature – including reopen feature implemented in previous version of TSP [default 0] Reconnect_Disable.reg tsp=>1.0.3.298
Reconnect_LogFilename  Reconnect_LogFileName=
"RoAlcEnt.txt"
powinno byc defaultowo ustawione Enable Reconnect Log „Filenamestring” = max 256 chars c:\windows\system32\RoAlcEnt.txt [default ”” =empty string–no log file] Reconnect_LogFilename.reg tsp=>1.0.3.298
Reconnect_Timeout Reconnect_Timeout="45" [45] After 45s if no watch dog from PBX disconnect and connect again for every 45s if not successfull [default 45]
= < 0 – timer disabled
> 31 enabled with given time
when value is in interwal (0 ; 31)  value is set to default – 45
Reconnect_Timeout_45.reg tsp=>1.0.3.298
Reconnect_ACSEABRT Reconnect_CSTAABRT="1" [1] 29.10.2012 1_2_1225
[0]
when receive from PBX CSTAABORT treat it as disconnect and enable reconnect procedure, if not successfull try in every 45s(configurable) Wird nie notwendig, da Abort nicht immer gleich mit Verbindungsabbruch ist und auch wenn, dann wird die Verbindung n Reconnect_
CSTAABRT_ Enable.reg
tsp=>1.0.3.298
Connection_Reset_once CSTAConnection_Reset="1" [0] Reset once connection with PBX, it will be made in next 45s (configurable Reconnect_Timeout) and registry will be set on 0 after reset. Funktion noch nicht richtig implementiert - nicht verwenden. Alc_Ent_CSTAConnection_
Reset_Enable.reg
tsp=>1.0.3.531 in version tsp=>1.0.3.603 22.02.2007 added write info  "CSTAConnection_Reset START CSTALink:"  to file RoAlcEnt.txt or other if registry set Reconnect_LogFileName
Connection_ResetTime CSTAConnection_ResetTime
="3:15"
[] Reset every day at 3:15 connection with PBX. Funktion noch nicht richtig implementiert - nicht verwenden. Alc_CSTAConnection_
ResetTime.reg
tsp=>1.0.3.603
22.02.2007
write info "CSTAConnection_Reset START CSTALink:" to file RoAlcEnt.txt or other if registry set Reconnect_LogFileName
CSTASnapshot
OnLineClose
CSTASnapshot
OnLineClose="1"
powinno byc defaultowo ustawione Snapshot csta line for existing calls during lineClose
[default 0 do not make Snapshot]
Alc_Ent_CSTASnapshot_
LineClose.reg
tsp=>1.0.3.657
06.03.2007
1. Found call in tsp and in CSTA:
SnapshotDevice:*180 Call:<11f8050: LINECALLSTATE_ONHOLD, Cler=*180, Cled=80001000, Cntd=80001000, Rdng=, Rdon=, Caid=203, Neqt=789> CSTA:<Caid=203, Neqt=789, Lci=LCI_HELD>
2. Found call in CSTA, but not found in tsp: SnapshotDevice:80001000 Call:<NOT EXIST> CSTA:<Caid=17, Neqt=357, Lci=LCI_CONNECTED>
3. Found in tsp, but not found in CSTA: ClearCall
4. Not found call in tsp and CSTA: CPBXAlcatel::CstaResponse;Line:80001000;;;;;SnapshotDevice roid 9; No calls in CSTA, Calls in tsp: 0
CSTASnapshot
OnDisconnect
CSTASnapshot
OnDisconnect="1"
  Snapshot csta line for existing calls during Reconnect CSTA
[default 1 do make Snapshot]
Alc_Ent_CSTASnapshot_
Disconnect.reg
CSTASnapshot_Timeout CSTASnapshot_Timeout="300" [200] Wait for answer from snapshot Timeout [ms] [Default 200 ms] Alc_Ent_CSTASnapshot_
Timeout.reg
CSTA_SnapshotTime CSTA_SnapshotTime="2:55" [] At 2:55 will be Snapshot made (calls in pbx) [Default no key - no work] Alc_Ent_CSTA_SnapshotTime
_2_55.reg
tsp=>1.0.3.670
08.03.2007
CSTA_SnapshotTime in RoAlcEnt_Calls.txt
WatchDogDisconnectCount WatchDogDisconnectCount="1" [3] how many ticks (default one - 45s) me make disconnect Alc_WatchDogDisconnectCount.reg tsp=>1.0.3.1009
11.07.2007
CSTA Snapshot Lines Interval CSTASnapshot
LinesInterval="180"
[360] 29.10.2012 1_2_1225
refresh 45s
[0] no work
Make Snapshot on every 180 s on all opened lines which have calls Alc_CSTASnapshot
LinetInterval.reg
tsp=>1.0.3.1028
29.08.2007
CSTA Snapshot Lines
Sleep
CSTASnapshot
LinesSleep="1000"
[1000] 29.10.2012 1_2_1225
refresh 45s
[0] Sleep(0)
Between next line Sleep 1000 [ms] Alc_CSTASnapshot
LinesSleep.reg
CSTA Snapshot Lines
LinesPrint
CSTASnapshot
LinesPrint="0"
[0] no work
refresh 45s
Print log on every 3 min when set CSTASnapshotLinesIntervall="180" Alc_CSTASnapshot
LinesPrint.reg
           
Call Handling          
Redirect_Block_
UntilFirstMakeCall
"Redirect_Block_
UntilFirstMakeCall"="1"
[0] Block Redirect till first MakeCall. In old Alcatel PBX cause CSTA hang Alc_Redirect_Block_
UntilFirstMakeCall_1.reg
tsp=>1.0.3.1218
11.06.2012
AutoAnswerMakeCall1_On AutoAnswerMakeCall1="1" [1] Turn on sending SendAnswer for HookOff phone imidiately after SER_MakeCall Alc_Ent_AutoAnswer MakeCall1_On.reg tsp=>1.0.3.533
AutoAnswerMakeCall2_On AutoAnswerMakeCall2="1" [0] Turn on sending SendAnswer for HookOff phone after EVT_Initiated Alc_Ent_AutoAnswer MakeCall2_On.reg tsp=>1.0.3.533
Drop_MakeCall_Sleep "Drop_MakeCall_Sleep"=200 [400] 23.05.2007
tsp=>1.0.3.932
[100] 08.02.2007
tsp=>1.0.3.586
Changes Sleep time between Drop on call in Dialtone and MakeCall Alc_Drop_MakeCall _Sleep.reg tsp=>1.0.3.586
08.02.2007
           
ClearCalls ClearCalls="1" [1] 23.05.2007
tsp=>1.0.3.932
[0] 07.05.2007
tsp=>1.0.3.888
MakeCall return error, cal snapshot device if snapshot device return no calls in pbx, clear calls on this line in tsp. Do not inform TAPI about deleting calls Alc_ClearCalls.reg tsp=>1.0.3.888
07.05.2007
ClearCallsSetIdle ClearCallsSetIdle="0" [1] When Clear calls enabled, set state to IDLE before delete it from tsp Alc_ClearCallsSetIdle.reg tsp=> 1.0.3.912
21.05.2007 
ClearCallsDeleteInTsp ClearCallsDeleteInTsp="1" [1] 29.10.2012 1_2_1225
[0]
When Clear calls enabled, delete call from tsp Alc_ClearCallsDeleteInTsp.reg tsp=> 1.0.3.912
21.05.2007 
ClearCallsDeleteInTspDelay "ClearCallsDeleteInTsp
Delay"="120"
[5] 29.10.2012 1_2_1225
[0]
Call will be deleted after delay from set state Idle (ClearCallsDeleteInTsp and ClearCallsSetIdle must be 1) Alc_ClearCallsDeleteInTsp
Delay_120.reg
tsp=> 1.0.3.1207
29.07.2011
ClearCallsAfterCallInitiated ClearCallsAfterCallInitiated="0" [1]  1.0.3.1009
refresh 45s
[0] 1.0.3.967
Send Snapshot when CallInitiated, and when response check calls Alc_ClearCallsAfterCallInitiated
_Disable.reg
tsp=> 1.0.3.967
22.06.2007 
ClearCallsReqSendOk ClearCallsReqSendOk="0" [1]  1.0.3.1009
refresh 45s
[0] 1.0.3.967
When ClearCall and ClearCallsReqSendOkreg then SendRequestOk Alc_ClearCallsReqSendOk_
Disable.reg
tsp=> 1.0.3.967
22.06.2007 
         
RequestNoUpdate
AfterTimeout
RequestNoUpdate
AfterTimeout="1"
[0] When event from pbx to call, and on call is request then send this request as success to tapi - 1 - disable this function Alc_RequestNoUpdate
AfterTimeout.reg
tsp=> 1.0.3.912
21.05.2007 
           
TAPI Handling          
Set fields RedirectionId,
redirectingId
AlwaysLastRed="1"    always set fields RedirectionId i redirectingId (isn't checking CAUSE Evt delivered) [default 0] AlwaysLastRed.reg tsp=>1.0.3.161
           
Loging
Start log Alcatel.TSP
 TRACE,
call information to file
Log2File_Activate="1"   Create TRACE logs in files:  [default 0 not create file]
c:\deb_TSP_1165390571.log, - all TRACE
c:\call_TSP_ - information about calls
alcatel_log2file.reg tsp=>1.0.3.298 < 1.0.3.586 CCall::SetState, CSPIAddress::NewCall, CSPIAddress::NewConfCall, CSPICall::CSPICall, CSPICall::~CSPICall, CSPILine::NewCall, CSPILine::NewConfCall.
Start log Alcatel.TSP
TRACE,
call information to file
Log2File_Activate="1"   Create TRACE logs in files:  [default 0 not create file]
c:\windows\system32\deb_TSP_1165390571.log, - all TRACE
c:\windows\system32\call_TSP_ - information about calls
alcatel_log2file.reg tsp=>1.0.3.586 CCall::SetState, CSPIAddress::NewCall, CSPIAddress::NewConfCall, CSPICall::CSPICall, CSPICall::~CSPICall, CSPILine::NewCall, CSPILine::NewConfCall.
Calls_LogFileName Calls_LogFileName=
"RoAlcEnt_Calls.txt"
  Create Calls Log file: c:\windows\system32\RoAlcEnt_Calls.txt
Only for info. Do not change this file
alcatel_calls2file.reg tsp=>1.0.3.298
added in 1.0.3.586
CPBXAlcatel::CstaError:_ReqLineMakeCall, all errors in CPBXAlcatel::CstaError, CPBXAlcatel::CstaResponse, InitializeReg:SendMonitorStart. SendMonitorStop, CPBXAlcatel::LineOpen all return, LineClose, CallDrop, CallAnswer, CPBXAlcatel::MakeCall_Dial all re
Calls_Log_Enable Calls_Log_Enable="1"    Enable Calls Log file [default 0 not create file, check registry before use] Calls_Log_Enable.reg tsp=>1.0.3.1045
03.06.2009
 
           
Internal Functions
Request_Timeout_Timer Request_Timeout_Timer="8"   Print and Delete old requests [default 0 - doesn't work] Alc_Request_Timeout_Timer.reg tsp=>1.0.3.767
03.04.2007
Request_Timeout Request_Timeout="8"   Which request is old 8s [default 0 - all are old] Alc_Request_Timeout.reg
 
Request_Timeout_Disable Request_Timeout_Disable="1"   Disable Request_Timeout_Timer
[default 0 - work if set Request_Timeout_Timer] [refresh 45s]
Alc_Request_Timeout_
Disable.reg
tsp=>1.0.3.769
04.04.2007
Request_Timeout_
TickPrint_Enable
Request_Timeout_
TickPrint_Enable="1"
  Enable Print Tick in Request_Timeout_Timer
[default 0 - don't print if set Request_Timeout_Timer] [refresh 45s]
Alc_Request_Timeout_
TickPrint_Enable.reg
tsp=>1.0.3.781
13.04.2007